Wire Feeder Adapters
601.082
Single adapter
(fits on most feeders)
material: brass
¼" male thread
with inner insulating plastic core
601.082i
Single adapter (fits on most feeders)
material: stainless steel 304
¼" male thread
with inner insulating plastic core
601.155
Single adapter
(fits on Fronius new feeders)
material: brass
Thread M20x2.5 male
with inner insulating plastic core
601.560
Adapter with locking system for the teflon liner
(fits on new Fronius feeders)
material: brass
M20x2.5 male thread
601.084
Single Adapter
(fits on Cloos wire feeders)
material: brass
⅜ " female thread
with inner insulating plastic core
601.589
Single Adapter
(fits on the new Cloos WDA-50 wire feeders)
material: brass and plastic support
⅜ " female thread
with inner insulating plastic core
601.086
Single adapter
material: brass
Thread M10x1 female thread
with inner insulating plastic core
601.085
Single adapter
(used with submerged arc wires)
material: brass
18mm outer diameter
with inner insulating ceramic nozzle
601.157
Single adapter
(fits on Dome and on SAW feeder)
material: brass
½ gas male thread
with inner insulating ceramic nozzle
601.080
Standard adapter
material: brass
¼" female and M20x1.5 male thread
with inner insulating plastic core
601.091
Single adapter
(fits on SmartBooster)
material: brass
⅜ " male thread
with inner insulating plastic core and guiding tip
601.087
Single adapter
(fits on Merkle Feeders)
material: brass
⅜ " male thread
with inner insulating plastic core
601.096
Single adapter
material: brass
10x1 male thread
with inner insulating plastic core
601.096 + 601.061
Double adapter
(fits on EWM or LORCH feeders)
601.096 brass with insulating plastic core
and M10x1 male thread
601.061 plastic with M10x1 female thread
601.063
Double adapter
(fits on older Fronius feeders)
material: brass
¼" female and ¼" male thread
with inner insulating plastic core
601.080 + 601.156
Double stem adapter
(fits on OTC feeders)
material: brass
¼" female and ¼" male thread
with inner insulating plastic core
601.080 + 601.556
Double stem adapter
(fits on OTC feeders)
material: brass
¼" female and ¼" male thread
with inner insulating plastic core
601.159
Double adapter
(fits on gas quick-connectors)
material: brass
with inner insulating plastic core
601.158
Double adapter
(fits on Esab wire feeders)
material: brass
¼" male thread
with inner insulating plastic core
601.209
Complete stem adapter
(fits on Kemppi wire feeders)
material: stainless steel 304
with inner insulating plastic core
601.154
Complete Adapter
(fits on Miller wire feeders)
material: brass
with inner insulating plastic core
601.154i
Complete Adapter
(fits on Miller wire feeders)
material: stainless steel 304
with inner insulating plastic core
601.082 + 601.165
Double adapter
(fits on Lincoln Feeders)
plastic (601.165) - ¼" female thread
brass (601.082) - ¼" male thread
with inner insulating plastic core
601.573
Single adapter
(used with submerged arc wires)
material: brass
⅜" male thread
with inner insulating ceramic nozzle
601.564
Double adapter
(used with submerged arc wires)
plastic (601.165) - ⅜" female thread
brass (601.573) - ⅜" male thread
with inner insulating plastic core
601.506
Double adapter with conical entrance holes for emergency extensions (mostly used when joining two conduits before the X,Y axis inside the cable tracks)
Material: plastic
601.151
Double adapter with support bracket
material: brass + steel
mainly used when joining two conduits (placed outside the cable tracks)
with inner insulating plastic core
601.080 + 601.562
Adapter with locking ring for connecting a conventional conduit to a Maxiglide
material: brass + plastic insulating core
thread: ¼" female
This adapter is mainly used whenever the last section of the wire guiding conduit has to pass through a robot arm space constraint which is too tight for the 35mm Maxiglide OD of the corrugated hose.
Dome Adapters
601.157
Dome adapter with inner ceramic nozzle, bolts and washers
material: brass + steel + ceramic
recommended when the distance between wire coil and the dome exit point is rather limited.
601.198
Dome adapter with washers, bolts and flexible conduit
(12 maxiglide bodies with rolls)
material: brass + steel + plastic
with inner insulating plastic core
5001.200
Roll with support
material: plastic
Mounted on 24/7 endless plastic domes this accessory makes the wire payout smoother and prevents it from cutting through the dome plastic.
